MacDon M200 Návod k obsluze stáhnout pdf (Strana 130)

MAINTENANCE AND SERVICING

Form 169017 / 169087 / 169095 128 Revision C

7.7.4 STEERING ADJUSTMENTS

7.7.4.1 Steering Link Pivots

The following checks should be performed

annually:

DANGER

Stop engine and remove key from ignition

before leaving operator's seat for any reason.

A child or even a pet could engage an idling

machine.

d. Place GSL in N-DETENT, shutdown engine, and

remove key

e. Check for evidence of interference of moving parts

with hoses, tubes, other linkages.

f. Check steering rod bolts (A) for looseness, and

ball joints (B) for any perceptible play or

movement.

g. Check steering link bolts (C) for looseness, and

ball joints (D) for any perceptible play or

movement.

h. If bolts are loose:

1. Back off jam-nut (E).

2. Tighten inside nut (F) to 70 - 80 ft·lbf

(95 - 108 N·m).

3. Hold inside nut (F) and tighten jam-nut (E) to

60 - 70 ft·lbf (81 - 95 N·m).

i. If steering rod ball joints (B) or steering link ball

joints (D) are loose, they should be replaced. See

your MacDon Dealer or refer to the Technical

Service Manual for replacement procedures.

j. After replacing parts or making adjustments,

perform checks for neutral interlock and steering

lock. Refer to Section 7.7.2. Safety Systems.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 233 234

Žádné komentáře

MacDon M200 Návod k obsluze Strana 130